Silicones, Inc.Silicones, Inc.RTV-2 Silicone Rubber
All products

Technical Datasheet · P-573

Ultra-soft platinum-cure RTV-2 silicone for animatronics

Platinum cure (addition)

Key properties

Shore A hardness (7 day)4Shore A

Feels like a gel shoe insole. Soft and cushioning.

Mix ratio (wt)10:1
Working time1.0–2.0hours
Cure time16–18hours
Tear resistance81ppi

General Information

P-573 is a specialty platinum cured silicone designed for animatronics where small, precise movements of the robotics are required. This material is not designed for most animatronic applications. Please refer to other Silicones, Inc. silicones for a wider range of materials. P-573 is mixed 10 parts base to one part activator by weight; deviations from this ratio will cause changes in the physical properties.

The information contained in this data sheet is, to our best knowledge, true and accurate, but all recommendations or suggestions are made without guarantee. Since the conditions of use are beyond our control, Silicones, Inc. disclaims any liability incurred in connection with the use of our products and information contained herein.

Typical Properties

Uncatalyzed Compound

Color
Base:translucentActivator:translucent
Viscosity
Base:44,000cpsActivator:1,000cps
Mixing Ratio
By weight:10:1By volume:n.a.
Mixed Viscosity
n.a.cps
Working Time
1.0–2.0hours
Cure Time
16–18hours
Shelf Life
n.a.

Vulcanized (Cured) Properties

Measured at 7 days, 70°F / 50% relative humidity

Shore A Hardness
One day:37 days:4
±4 durometer
Tear Resistance
81 ± 3ppiASTM D624
Tensile Strength
300 ± 13psiASTM D412
Elongation
745 ± 33%ASTM D412
Service Temperature
n.a.
Shrinkage
n.a.
Specific Gravity
1.08
Coverage
n.a.
Shore 00 Hardness
1 day 50; 7 day 54

Take this datasheet with you

Print it, or save it as a PDF.

Planning a job? Confirm fit with our team first. Contact us.